1) Promotes cell renewal and rejuvenation using the combination of exfoliation plus vacuum suction.
2) Ergonomic design, portable and convenient to use on your face, elbows, hands, feet or wherever you have age spots, fine lines, wrinkles.
3) Equipped with medical-grade removable diamond-tip
4) 4 level intensity level for option
5) One button operation with LED power level indicators.
6) Equipped with special mesh filter below where the filter is placed for protection. When users forgets to put in the filter, can prevent the motor from being ruined.
7) Suitable for all skin types, show immediate results without discomfort or downtime
8) Improves the overall tone and health of the skin
9) Reduce the appearance of fine lines ,wrinkles, sunspots, mild acne and scarring, stretch marks, keratosis pilaris, and improving the look of rough and bumpy skin.
10) Removes dead skin cells brightening the natural glow of the skin. Vascular stimulation and collagen production.
11) Allows for better absorption of skincare products.
12) Power supply : Input AC100-240V, Output DC-12V
2. Different tips
3. Treatment steps
(1) Facial Treatment Routine
• Wash and dry your face
• Remove the handle from the charging base and fit your choice of diamond tip with a new black wool filter.
• Press and hold the power button for 2 seconds to turn the unit on. Press as required to increase the power level, as indicated by the LEDs. It is recommended to start on level 1 for the first treatment and to progress to a higher level if comfortable. See also MAX recommended levels in the above diagrams
• Place the diamond tip flat against the skin until you feel suction then move it slowly across the surface of the skin in a smooth motion, covering the same area no more than 2-3 times in one treatment. Do not press hard. In some areas it can help to hold the skin taught with the other hand (eg. around the eyes).
• The diagrams will help you establish an effective facial routine.
(2) After treatment
• Press and hold the power button for 2-3 seconds to turn off device.
• Wash your face with cold water to remove any remaining dead skin cells and then apply your preferred moisturizer. NOTE: Avoid using AHA (acid based) moisturisers on the day of treatment
• Depending on your skin type, you may experience some reddening or increased sensitivity after treatment. This is perfectly normal and usually subsides within a few hours.
• Avoid direct sun exposure after treatment, consider applying a stronger sunscreen as required.
• Always, dispose of the used black wool filter and replace with a new filter ready for next use.
• Remove dead skin cells and debris from the diamond tip using the brush provided. We also recommend the periodic use of an ultrasonic cleaner for deep cleaning the diamond tip, especially if it starts to feel smooth or less effective
(3) Other Treatments
Other areas of the body can also be treated 2-3 times a week. For example, neck, chest, hands etc. When treating larger areas, replace the black wool filter part
way through the treatment in order to maintain the level of suction. Aim to cover the same area no more than 2-3 times in one treatment. A body tip for wider coverage and a precision tip for targeting smaller problem areas, are both available separately from our website. See ACCESSORIES AND SPARE PARTS.
*Improves the overall tone and health of the skin. *Reduces the appearance of fine lines and wrinkles. *Reduces the appearance of brown sports caused by sun and age. *Vascular stimulation and collagen production. *Improves the skins texture and smoothness. *Improves the appearance of mild acne, and superficial scarring *A treatment to help improve the appearance of keratosis pilaris, also known as chicken skin or red bumps. *An effective treatment to help improve the appearance of mild stretch marks. * Allows for better absorption of skincare products.
(1)How often should I use the product?
It’s best to start slowly – usually just once a week, then build up to 2 or 3 times a week if this is comfortable for your skin.
(2)Will it hurt?
No. Treatment should not be painful. Depending on the sensitivity of your skin,you may feel slight discomfort from the diamond tip as it moves across the skin and there could be some short term redness or sensitivity after treatment, but this will soon subside. If treatment is uncomfortable, then you may need to use a lower power setting or switch to the sensitive diamond tip.
(3)Can I use the product in combination with anti-aging creams/serums?
If your anti-aging cream or serum contains AHA (or acid) then it should not be used on the same day as the microdermabrasion treatment, but can be used on non-treatment days. Non-AHA (acid free) anti-aging products can be used at any time.
(4)The product does not switch on
The power button has to be pressed continuously for 2-3 seconds to turn the product on. If you try this and it still doesn’t work, then it may need recharging. See “CHARGING THE BATTERY”
(5)The product seems to be losing power
This can happen if the black wool filter is not replaced after each treatment. Try fitting a new filter. Also check the tip to ensure that the plastic part of the tip has no cracks or damage. Check that the two rubber o-rings are in place on the nozzle end of the unit (where the tip fits over).
(6)The diamond tip no longer seems rough
The diamond tip can accumulate skin cells over time which may start to make it feel smooth and reduce its effectiveness. If this happens we recommend cleaning the diamond tip in an Ultrasonic Cleaner. These are either available to purchase,or jewelry stores offer a cleaning service. If using the product regularly you may need to do this several times a year to maintain optimum effectiveness.
7. More pictures
8. About US:
1.Established in 2004, Joint Chinese Ltd is a specialized manufacturer that integrates R&D,production,sales and services of Beauty,Health and Medical Devices.Our main products are Ultrasonic Beauty Device and Pedometer.
2.We own moulding and plastic injection workshop,SMT,PCBA,silk printing and painting spray through all production stage, which enable us to guarantee total customer satifaction. Thanks to our strong R&D support from Japan, we welcome all customized orders, and OEM and ODM projects. Our products are well received by many brand name companies as YAMASA,CITIZEN,A&D,IDT,